Watts Premier WP531407 RO Pure Reverse Osmosis Water Filtration System with Top-Mount Air-Gap Faucet Brushed Nickel - B07VGNRK62
This fits your . Make sure this fits by entering your model number. This Watts Premier Reverse Osmosis system consists of four stages of filtration based upon these treatments: sediment pre-filter reduces dirt, silt and rust; the carbon pre-filter reduces chlorine taste and odors and conditions the water before it is treated by the reverse osmosis membrane; the 50 GPD membrane reduces TDS and other contaminants like chromium, arsenic, copper, lead, and the carbon post-filter reduces chemicals like MTBE's, atrazine, benzene, 2,4-D, and lindane Sediment (WP105311), Carbon (WP105351), 50 GPD Membrane (WP105331) and Post Carbon (WP105381) The system includes a RO Pure Reverse Osmosis module with four pre-installed filters; a parts bag; a brushed nickel, monitored, top-mount, air-gap faucet, and 3 gallon storage tank giving you crystal clear, high-quality, and great-tasting drinking water. This space-saving, compact design allows this system to fit comfortably under your sink, requires fewer tube connections, includes back-flow prevention valves installed between the elements and cartridges have double O-rings so they won't leak. The easy, quick-change push release filter system allows for easy filter change with no need to shut off the water source, is installed with check valves in the filter lid between cartridges to prevent back-flow and shut off valves in each filter head that shuts off the water flow when cartridges are removed. Maximum operating pressure is 80 psi and to maintain top performance replace sediment and carbon pre-filters every 6 months, post carbon filter every 12 months, and the membrane every 2 to 5 years
The RO Pure Reverse Osmosis System consists of four separate filtration stages to provide you with clean, delicious tasting water. This kit includes one RO Pure Reverse Osmosis Module with pre-installed filters, 3 gallon storage tank, and brushed nickel, monitored, top mount, air-gap faucet. Changing filters is easy with the unique swivel-valve, push-button assembly allowing for one-step filter changes that do not require you to shut off your water source. It is important that this system is properly installed and maintained with an incoming water pressure of 40 to 80 psi for it to operate as designed. Four stages of filtration trap particulate matter and ensure a greater reduction of chlorine and other materials that cause bad taste and odors. This kit contains everything you need to maintain crystal clear, high quality, and great tasting water. In order to maintain your system in its top performance it is recommended to change out both the sediment and carbon pre-filters every 6 months, the carbon post-filter every year and the membrane every 2 to 5 years depending on the quality of your incoming water supply.